Hi all, on the remote site run remotetrx program, after have received the data from the svxlink (master) inexplicably put the local TX on for a very short time.
You can see the remotetrx log:
Rx1: The squelch is OPEN (80.9463)
Rx1: SetMuteState(NONE)
Rx1: The squelch is CLOSED (80.0048)
Tx1: Turning the transmitter ON
Tx1: Turning the transmitter OFF
Rx1: SetMuteState(NONE)
This is te svxlink log:
Voter: The squelch is OPEN (NetRx=78.4463)
Tx1: Turning the transmitter ON
NetTx: The transmitter is ON
Voter: The squelch is CLOSED (NetRx=79.9912)
Tx1: Turning the transmitter OFF
NetTx: The transmitter is OFF
Regards
73 Marco IW0RED