Posts by DL1UDO

  • Radiobox und Svxlink

    Ich teile hier mal meine Konfig:

    Verbindung zum Echolink geht,

    auch sendet er auf der Eingabe vom Relais aus,

    SubAudio ist auf 67 Hz eingestellt.

    ###############################################################################

    # #

    # Configuration file for the SvxLink server #

    # #

    ###############################################################################

    [GLOBAL]

    #MODULE_PATH=/usr/lib/svxlink

    LOGICS=SimplexLogic

    CFG_DIR=svxlink.d

    TIMESTAMP_FORMAT="%c"

    CARD_SAMPLE_RATE=16000

    LOCATION_INFO=LocationInfo

    #LINKS=NetLink

    [SimplexLogic]

    TYPE=Simplex

    RX=Rx1

    TX=Tx1

    MODULES=ModuleHelp,ModuleParrot,ModuleEchoLink

    CALLSIGN=DB0XX

    SHORT_IDENT_INTERVAL=30

    LONG_IDENT_INTERVAL=60

    #IDENT_ONLY_AFTER_TX=4

    #EXEC_CMD_ON_SQL_CLOSE=500

    EVENT_HANDLER=/usr/share/svxlink/events.tcl

    DEFAULT_LANG=en_US

    #RGR_SOUND_DELAY=250

    #REPORT_CTCSS=136.5

    TX_CTCSS=ALWAYS

    MACROS=Macros

    FX_GAIN_NORMAL=0

    FX_GAIN_LOW=-12

    #ACTIVATE_MODULE_ON_LONG_CMD=4:EchoLink

    #QSO_RECORDER=8:QsoRecorder

    #ONLINE_CMD=998877

    #MUTE_RX_ON_TX=1

    #MUTE_TX_ON_RX=1

    [RepeaterLogic]

    TYPE=Repeater

    RX=Rx1

    TX=Tx1

    MODULES=ModuleHelp,ModuleParrot,ModuleEchoLink

    CALLSIGN=DB0XXX

    SHORT_IDENT_INTERVAL=30

    LONG_IDENT_INTERVAL=60

    #IDENT_ONLY_AFTER_TX=4

    #EXEC_CMD_ON_SQL_CLOSE=500

    EVENT_HANDLER=/usr/share/svxlink/events.tcl

    DEFAULT_LANG=en_US

    RGR_SOUND_DELAY=250

    #REPORT_CTCSS=136.5

    #TX_CTCSS=SQL_OPEN

    MACROS=Macros

    #SEL5_MACRO_RANGE=03400,03499

    FX_GAIN_NORMAL=0

    FX_GAIN_LOW=-12

    #QSO_RECORDER=8:QsoRecorder

    #NO_REPEAT=1

    IDLE_TIMEOUT=20

    #OPEN_ON_1750=50

    #OPEN_ON_CTCSS=136:2000

    #OPEN_ON_DTMF=*

    OPEN_ON_SQL=50

    #OPEN_ON_SEL5=01234

    OPEN_SQL_FLANK=OPEN

    OPEN_ON_SQL_AFTER_RPT_CLOSE=60

    #IDLE_SOUND_INTERVAL=3000

    #SQL_FLAP_SUP_MIN_TIME=1000

    #SQL_FLAP_SUP_MAX_COUNT=10

    #ACTIVATE_MODULE_ON_LONG_CMD=4:EchoLink

    #IDENT_NAG_TIMEOUT=15

    #IDENT_NAG_MIN_TIME=2000

    #ONLINE_CMD=998877

    #STATE_PTY=/dev/shm/state_pty

    [LinkToR4]

    CONNECT_LOGICS=RepeaterLogic:94:SK3AB,SimplexLogic:92:SK3CD

    #DEFAULT_ACTIVE=1

    TIMEOUT=300

    #AUTOACTIVATE_ON_SQL=RepeaterLogic

    [Macros]

    1=EchoLink:9999#

    9=Parrot:0123456789#

    03400=EchoLink:9999#

    [QsoRecorder]

    REC_DIR=/var/spool/svxlink/qso_recorder

    #MIN_TIME=1000

    MAX_TIME=3600

    SOFT_TIME=300

    MAX_DIRSIZE=1024

    #DEFAULT_ACTIVE=1

    #TIMEOUT=300

    #QSO_TIMEOUT=300

    #ENCODER_CMD=/usr/bin/oggenc -Q \"%f\" && rm \"%f\"

    [Voter]

    TYPE=Voter

    RECEIVERS=Rx1,Rx2,Rx3

    VOTING_DELAY=200

    BUFFER_LENGTH=0

    #REVOTE_INTERVAL=1000

    #HYSTERESIS=50

    #SQL_CLOSE_REVOTE_DELAY=500

    #RX_SWITCH_DELAY=500

    #SQL_STATE_PTY=/var/run/svxlink/sql_state

    [MultiTx]

    TYPE=Multi

    TRANSMITTERS=Tx1,Pa1

    [ReflectorLogic]

    TYPE=Reflector

    HOST=servercall.ampr.org

    PORT=5300

    AUTH_KEY="TOPSECRET"

    CALLSIGN="NOCALL"

    AUDIO_CODEC=OPUS

    [NetLink]

    NAME=NetLink

    DEFAULT_ACTIVE=1

    TIMEOUT=300

    CONNECT_LOGICS=SimplexLogic:9:NOCALL,ReflectorLogic

    [RemoteRx1]

    TYPE=Net

    HOST=servercall.ampr.org

    TCP_PORT=5220

    AUTH_KEY="TOPSECRET"

    LOG_DISCONNECTS_ONCE=1

    CODEC=OPUS

    [RemoteTx1]

    TYPE=Net

    HOST=servercall.ampr.org

    TCP_PORT=5220

    AUTH_KEY="TOPSECRET"

    LOG_DISCONNECTS_ONCE=1

    CODEC=OPUS

    [Rx1]

    TYPE=Local

    AUDIO_DEV=alsa:hw:0

    AUDIO_CHANNEL=0

    SQL_DET=GPIO

    SQL_START_DELAY=0

    SQL_DELAY=0

    SQL_HANGTIME=0

    #SQL_EXTENDED_HANGTIME=1000

    #SQL_EXTENDED_HANGTIME_THRESH=15

    #SQL_TIMEOUT=600

    VOX_FILTER_DEPTH=20

    VOX_THRESH=200

    #CTCSS_MODE=2

    #CTCSS_FQ=136.5

    #CTCSS_SNR_OFFSET=0

    #CTCSS_OPEN_THRESH=15

    #CTCSS_CLOSE_THRESH=9

    #CTCSS_BPF_LOW=60

    #CTCSS_BPF_HIGH=270

    SERIAL_PORT=/dev/ttyS0

    SERIAL_PIN=CTS

    #SERIAL_SET_PINS=DTR!RTS

    #EVDEV_DEVNAME=/dev/input/by-id/usb-SYNIC_SYNIC_Wireless_Audio-event-if03

    #EVDEV_OPEN=1,163,1

    #EVDEV_CLOSE=1,163,0

    GPIO_SQL_PIN=gpio10

    #PTY_PATH=/tmp/rx1_sql

    #HID_DEVICE=/dev/hidraw3

    #HID_SQL_PIN=VOL_UP

    #SIGLEV_DET=TONE

    SIGLEV_SLOPE=1

    SIGLEV_OFFSET=0

    #SIGLEV_BOGUS_THRESH=120

    #TONE_SIGLEV_MAP=100,84,60,50,37,32,28,23,19,8

    SIGLEV_OPEN_THRESH=30

    SIGLEV_CLOSE_THRESH=10

    #DEEMPHASIS=1

    AUDIO_FILTER=HpBe1/1000

    SQL_TAIL_ELIM=150

    PREAMP=8

    PEAK_METER=0

    DTMF_DEC_TYPE=INTERNAL

    DTMF_MUTING=1

    DTMF_HANGTIME=100

    DTMF_SERIAL=/dev/ttyS0

    #DTMF_PTY=/tmp/rx1_dtmf

    #DTMF_MAX_FWD_TWIST=8

    #DTMF_MAX_REV_TWIST=4

    1750_MUTING=1

    #SEL5_DEC_TYPE=INTERNAL

    #SEL5_TYPE=ZVEI1

    #FQ=433475000

    #WBRX=WbRx1

    [WbRx1]

    #HOST=localhost

    #PORT=1234

    #CENTER_FQ=435075000

    #FQ_CORR=0

    #GAIN=0

    #PEAK_METER=1

    #SAMPLE_RATE=960000

    [Rx2]

    TYPE=Ddr

    SQL_DET=SIGLEV

    SIGLEV_DET=DDR

    SIGLEV_SLOPE=2.0

    SIGLEV_OFFSET=100.0

    SIGLEV_OPEN_THRESH=20

    SIGLEV_CLOSE_THRESH=10

    #DEEMPHASIS=1

    FQ=432900000

    MODULATION=NBFM

    SQL_TAIL_ELIM=300

    #PREAMP=0.0

    DTMF_DEC_TYPE=INTERNAL

    DTMF_MUTING=1

    DTMF_HANGTIME=100

    1750_MUTING=1

    WBRX=WbRx2

    [WbRx2]

    TYPE=RtlUsb

    DEV_MATCH=0

    FQ_CORR=0.0

    GAIN=49.6

    SAMPLE_RATE=960000

    [Tx1]

    TYPE=Local

    AUDIO_DEV=alsa:default

    AUDIO_CHANNEL=0

    PTT_TYPE=GPIO

    PTT_PORT=/dev/ttyS0

    PTT_PIN=gpio17

    #HID_DEVICE=/dev/hidraw3

    #HID_PTT_PIN=GPIO3

    #SERIAL_SET_PINS=DTR!RTS

    #PTT_HANGTIME=1000

    #TIMEOUT=300

    #TX_DELAY=500

    #CTCSS_FQ=136.5

    #CTCSS_LEVEL=9

    AUDIO_FILTER=LpBe1/1000

    #PREEMPHASIS=1

    DTMF_TONE_LENGTH=100

    DTMF_TONE_SPACING=50

    DTMF_DIGIT_PWR=-18

    #MASTER_GAIN=3.0

    [Tx2]

    TYPE=Local

    AUDIO_DEV=alsa:plughw:0

    AUDIO_CHANNEL=0

    PTT_TYPE=GPIO

    PTT_PIN=gpio17

    #AUDIO_FILTER=LpBe1/1000

    #MASTER_GAIN=3.0

    [Pa1]

    TYPE=Local

    AUDIO_DEV=alsa:null

    AUDIO_CHANNEL=0

    PTT_TYPE=SerialPin

    PTT_PORT=/dev/ttyUSB0

    PTT_PIN=RTS

    [LocationInfo]

    #APRS_SERVER_LIST=euro.aprs2.net:14580

    STATUS_SERVER_LIST=aprs.echolink.org:5199

    LON_POSITION=00.00.54E

    LAT_POSITION=00.00.21N

    CALLSIGN=EL-DB0XXX-L

    FREQUENCY=4XX.XXX

    TX_POWER=1

    ANTENNA_GAIN=6

    ANTENNA_HEIGHT=15m

    ANTENNA_DIR=-1

    PATH=WIDE1-1

    BEACON_INTERVAL=10

    #TONE=67

    TELEMETRY=0

    FREQ_INFO=1

    NARROW=1

    #SHIFT=-760

    COMMENT=[HAMServerPi]


    Module Echolink:

    [ModuleEchoLink]

    NAME=EchoLink

    ID=2

    TIMEOUT=60

    #ALLOW_IP=192.168.1.0/24

    #DROP_INCOMING=^()$

    #REJECT_INCOMING=^()$

    #ACCEPT_INCOMING=^(.*)$

    #REJECT_OUTGOING=^()$

    #ACCEPT_OUTGOING=^(.*)$

    #REJECT_CONF=0

    #CHECK_NR_CONNECTS=2,300,120

    SERVERS=europe.echolink.org

    CALLSIGN=DB0XXX-L

    PASSWORD=XXXXXXX

    SYSOPNAME=XXXXXX

    LOCATION=[HAMServerPi]

    #PROXY_SERVER=

    #PROXY_PORT=

    #PROXY_PASSWORD=

    #BIND_ADDR=10.20.30.40

    MAX_QSOS=10

    MAX_CONNECTIONS=11

    LINK_IDLE_TIMEOUT=300

    #AUTOCON_ECHOLINK_ID=9999

    #AUTOCON_TIME=1200

    #USE_GSM_ONLY=1

    #DEFAULT_LANG=en_US

    DESCRIPTION="[HAMServerPi]


    VY 73

  • Radiobox und Svxlink

    Hallo zusammen,

    ich habe hier eine Radiobox mit svxlink laufen, sie soll das C4FM Relais mit echolink bedienen,

    eigentlich alles ganz einfach. Leider ist in der Config svxlink.conf auch sehr viel auskommentiert, sodas das Relais

    nichts Hört, ich höre es aber sub Audio ist auch eingeschaltet hat jemand was ähnliches laufen und könnte mir mal seine Config zur Verfügung stellen ?

    Echolink Verbindung zum Server klappt.

    Für Vorschläge wäre ich dankbar

    VY 73 de DL1UDO