Fehlermeldung bei manuellen Update

dl1nux · November 20, 2018 at 9:04 PM

Hallo zusammen

ich habe das erste mal versucht manuell SVXlink zu aktualisieren. Es wurde damals selbst kompiliert deswegen jetzt wieder zu Fuß.

Und zwar nach dieser Anleitung (ganz unten): https://svxlink.de/selber-kompilieren/

Es lief soweit auch alles durch, nur beim make install gab es ganz am Ende noch eine Fehlermeldung, mit der ich nichts anfangen kann.

Die Frage ist, wurde nun trotzdem alles aktualisiert oder fehlt noch was?

Code

# make install
[  8%] Built target asynccore
[  9%] Built target asynccpp
[ 27%] Built target asyncaudio
[ 27%] Built target AsyncAtTimer_demo
[ 27%] Built target AsyncAudioFsf_demo
[ 28%] Built target AsyncAudioIO_demo
[ 28%] Built target AsyncAudioSelector_demo
[ 29%] Built target AsyncConfig_demo
[ 29%] Built target AsyncCppApplication_demo
[ 29%] Built target AsyncDnsLookup_demo
[ 30%] Built target AsyncExec_demo
[ 30%] Built target AsyncFdWatch_demo
[ 31%] Built target AsyncFramedTcpClient_demo
[ 31%] Built target AsyncFramedTcpServer_demo
[ 32%] Built target AsyncMsg_demo
[ 32%] Built target AsyncPtyStreamBuf_demo
[ 32%] Built target AsyncSerial_demo
[ 34%] Built target AsyncTcpClient_demo
[ 34%] Built target AsyncTcpServer_demo
[ 35%] Built target AsyncTimer_demo
[ 35%] Built target AsyncUdpSocket_demo
[ 36%] Built target svxmisc
[ 40%] Built target echolib
[ 40%] Built target EchoLinkDirectory_demo
[ 40%] Built target EchoLinkDispatcher_demo
[ 41%] Built target EchoLinkQso_demo
[ 42%] Built target echolib_test
[ 44%] Built target locationinfo
[ 48%] Built target digital
[ 71%] Built target trx
[ 72%] Built target afsk_test
[ 72%] Built target cal_sound_card
[ 74%] Built target DtmfDecoderTest
[ 80%] Built target svxlink
[ 81%] Built target ModuleHelp
[ 83%] Built target ModuleParrot
[ 85%] Built target ModuleEchoLink
[ 87%] Built target ModuleTcl
[ 88%] Built target ModuleDtmfRepeater
[ 89%] Built target ModuleMetarInfo
[ 91%] Built target ModuleFrn
[ 92%] Built target ModuleTrx
[ 96%] Built target remotetrx
[ 97%] Built target svxreflector
[ 98%] Built target siglevdetcal
[100%] Built target devcal
Install the project...
-- Install configuration: "Release"
-- Installing: /usr/lib/arm-linux-gnueabihf/libasynccore.so.1.5.99.1
-- Installing: /usr/lib/arm-linux-gnueabihf/libasynccore.so.1.5
-- Installing: /usr/lib/arm-linux-gnueabihf/libasynccore.so
-- Installing: /usr/include/svxlink/AsyncApplication.h
-- Up-to-date: /usr/include/svxlink/AsyncFdWatch.h
-- Up-to-date: /usr/include/svxlink/AsyncTimer.h
-- Up-to-date: /usr/include/svxlink/AsyncIpAddress.h
-- Installing: /usr/include/svxlink/AsyncTcpClient.h
-- Up-to-date: /usr/include/svxlink/AsyncDnsLookup.h
-- Installing: /usr/include/svxlink/AsyncUdpSocket.h
-- Installing: /usr/include/svxlink/AsyncTcpServer.h
-- Installing: /usr/include/svxlink/AsyncTcpConnection.h
-- Installing: /usr/include/svxlink/AsyncConfig.h
-- Up-to-date: /usr/include/svxlink/AsyncSerial.h
-- Up-to-date: /usr/include/svxlink/AsyncFileReader.h
-- Up-to-date: /usr/include/svxlink/AsyncAtTimer.h
-- Up-to-date: /usr/include/svxlink/AsyncExec.h
-- Up-to-date: /usr/include/svxlink/AsyncPty.h
-- Up-to-date: /usr/include/svxlink/AsyncPtyStreamBuf.h
-- Installing: /usr/include/svxlink/AsyncMsg.h
-- Installing: /usr/include/svxlink/AsyncFramedTcpConnection.h
-- Installing: /usr/include/svxlink/AsyncTcpClientBase.h
-- Installing: /usr/include/svxlink/AsyncTcpServerBase.h
-- Installing: /usr/lib/arm-linux-gnueabihf/libasynccpp.so.1.5.99.1
-- Installing: /usr/lib/arm-linux-gnueabihf/libasynccpp.so.1.5
-- Installing: /usr/lib/arm-linux-gnueabihf/libasynccpp.so
-- Removed runtime path from "/usr/lib/arm-linux-gnueabihf/libasynccpp.so.1.5.99                                                                                                                                                                             .1"
-- Up-to-date: /usr/include/svxlink/AsyncCppApplication.h
-- Installing: /usr/lib/arm-linux-gnueabihf/libasyncaudio.so.1.5.99.1
-- Installing: /usr/lib/arm-linux-gnueabihf/libasyncaudio.so.1.5
-- Installing: /usr/lib/arm-linux-gnueabihf/libasyncaudio.so
-- Removed runtime path from "/usr/lib/arm-linux-gnueabihf/libasyncaudio.so.1.5.                                                                                                                                                                             99.1"
-- Up-to-date: /usr/include/svxlink/AsyncAudioSource.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioSink.h
-- Installing: /usr/include/svxlink/AsyncAudioProcessor.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioClipper.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioCompressor.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioFilter.h
-- Up-to-date: /usr/include/svxlink/AsyncSigCAudioSink.h
-- Up-to-date: /usr/include/svxlink/AsyncSigCAudioSource.h
-- Installing: /usr/include/svxlink/AsyncAudioIO.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioSplitter.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioDelayLine.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioValve.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioAmp.h
-- Installing: /usr/include/svxlink/AsyncAudioSelector.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioPassthrough.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioMixer.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioFifo.h
-- Installing: /usr/include/svxlink/AsyncAudioDebugger.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioPacer.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioReader.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioDecimator.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioInterpolator.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioStreamStateDetector.h
-- Installing: /usr/include/svxlink/AsyncAudioEncoder.h
-- Installing: /usr/include/svxlink/AsyncAudioDecoder.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioRecorder.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioJitterFifo.h
-- Installing: /usr/include/svxlink/AsyncAudioDeviceFactory.h
-- Installing: /usr/include/svxlink/AsyncAudioDevice.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioNoiseAdder.h
-- Up-to-date: /usr/include/svxlink/AsyncAudioGenerator.h
-- Installing: /usr/include/svxlink/AsyncAudioFsf.h
-- Installing: /usr/lib/arm-linux-gnueabihf/libsvxmisc.a
-- Installing: /usr/include/svxlink/common.h
-- Up-to-date: /usr/include/svxlink/CppStdCompat.h
-- Installing: /usr/lib/arm-linux-gnueabihf/libecholib.so.1.3.3
-- Installing: /usr/lib/arm-linux-gnueabihf/libecholib.so.1.3
-- Up-to-date: /usr/lib/arm-linux-gnueabihf/libecholib.so
-- Removed runtime path from "/usr/lib/arm-linux-gnueabihf/libecholib.so.1.3.3"
-- Up-to-date: /usr/include/svxlink/EchoLinkDirectory.h
-- Installing: /usr/include/svxlink/EchoLinkDispatcher.h
-- Up-to-date: /usr/include/svxlink/EchoLinkQso.h
-- Up-to-date: /usr/include/svxlink/EchoLinkStationData.h
-- Installing: /usr/include/svxlink/EchoLinkProxy.h
-- Installing: /usr/bin/svxlink
-- Removed runtime path from "/usr/bin/svxlink"
-- Installing: /var/spool/svxlink/qso_recorder
-- Setting owner of /var/spool/svxlink/qso_recorder to svxlink:svxlink...
/bin/chown: invalid group: `svxlink:svxlink'
CMake Error at svxlink/svxlink/cmake_install.cmake:88 (MESSAGE):
  Error while changing owner of file /var/spool/svxlink/qso_recorder
Call Stack (most recent call first):
  svxlink/cmake_install.cmake:39 (INCLUDE)
  cmake_install.cmake:41 (INCLUDE)


Makefile:62: recipe for target 'install' failed
make: *** [install] Error 1

Display More

Ich hatte alles als root (su) durchgeführt.

Was meint ihr?

DL1ESK · November 20, 2018 at 10:49 PM Official Post

Du musst die Gruppe svxlink erstellen...

/bin/chown: invalid group: `svxlink:svxlink'

dl1nux · November 24, 2018 at 8:44 AM

Du hast recht, da gab es einen Fehler im System. Wir haben die Gruppen/User wieder korrigiert, danach funktionierte es. Danke!