Probleme mit Parrot, Fehler bei Debian

root@svxlink:/home/do1pbl# cat /etc/svxlink/svxlink.conf
###############################################################################
#                                                                             #
#                Configuration file for the SvxLink server                    #
#                                                                             #
###############################################################################


[GLOBAL]
MODULE_PATH=/usr/lib/svxlink
LOGICS=SimplexLogic
CFG_DIR=svxlink.d
TIMESTAMP_FORMAT="%c"
CARD_SAMPLE_RATE=16000
#CARD_SAMPLE_RATE=48000
LOCATION_INFO=LocationInfo


[SimplexLogic]
TYPE=Simplex
RX=Rx_70cm
TX=Tx_70cm
MODULES=ModuleHelp,ModuleParrot,ModuleEchoLink
#MODULES=ModuleHelp,ModuleEchoLink
CALLSIGN=DO1PBL
SHORT_IDENT_INTERVAL=0
LONG_IDENT_INTERVAL=0
#IDENT_ONLY_AFTER_TX=4
#EXEC_CMD_ON_SQL_CLOSE=500
EVENT_HANDLER=/usr/share/svxlink/events.tcl
DEFAULT_LANG=de_DE
#DEFAULT_LANG=en_US
RGR_SOUND_DELAY=0
#REPORT_CTCSS=136.5
#TX_CTCSS=ALWAYS
MACROS=Macros
#LINKS=LinkToR4
FX_GAIN_NORMAL=0
FX_GAIN_LOW=-12
ACTIVATE_MODULE_ON_LONG_CMD=4:EchoLink
#QSO_RECORDER_DIR=/var/spool/svxlink/qso_recorder
#QSO_RECORDER_CMD=8


[RepeaterLogic]
TYPE=Repeater
RX=Rx1
TX=Tx1
#MODULES=ModuleHelp,ModuleParrot,ModuleEchoLink,ModuleTclVoiceMail
MODULES=ModuleHelp,ModuleEchoLink
CALLSIGN=DO1PBL
SHORT_IDENT_INTERVAL=0
LONG_IDENT_INTERVAL=60
#IDENT_ONLY_AFTER_TX=4
#EXEC_CMD_ON_SQL_CLOSE=500
EVENT_HANDLER=/usr/share/svxlink/events.tcl
DEFAULT_LANG=de_DE
#DEFAULT_LANG=en_US
RGR_SOUND_DELAY=0
#REPORT_CTCSS=136.5
#TX_CTCSS=SQL_OPEN
MACROS=Macros
#SEL5_MACRO_RANGE=03400,03499
#LINKS=LinkToR4
FX_GAIN_NORMAL=0
FX_GAIN_LOW=-12
#QSO_RECORDER_DIR=/var/spool/svxlink/qso_recorder
#QSO_RECORDER_CMD=8
#NO_REPEAT=1
IDLE_TIMEOUT=30
OPEN_ON_1750=1000
#OPEN_ON_CTCSS=136:2000
#OPEN_ON_DTMF=*
#OPEN_ON_SQL=5000
#OPEN_ON_SEL5=01234
#OPEN_SQL_FLANK=OPEN
#OPEN_ON_SQL_AFTER_RPT_CLOSE=10
IDLE_SOUND_INTERVAL=3000
#SQL_FLAP_SUP_MIN_TIME=1000
#SQL_FLAP_SUP_MAX_COUNT=10
ACTIVATE_MODULE_ON_LONG_CMD=4:EchoLink
#IDENT_NAG_TIMEOUT=15
#IDENT_NAG_MIN_TIME=2000


[LinkToR4]
CONNECT_LOGICS=RepeaterLogic,SimplexLogic
COMMAND=94
NAME=TEST


[Macros]
1=EchoLink:9999#
9=Parrot:0123456789#
03400=EchoLink:9999#


[Voter]
TYPE=Voter
RECEIVERS=Rx1,Rx2,Rx3
VOTING_DELAY=200
#BUFFER_LENGTH=0


[MultiTx]
TYPE=Multi
TRANSMITTERS=Tx1,Tx2,Tx3


[NetRx]
TYPE=Net
HOST=remote.rx.host
TCP_PORT=5210
AUTH_KEY="Change this key now!"
CODEC=S16
#SPEEX_ENC_FRAMES_PER_PACKET=4
#SPEEX_ENC_QUALITY=4
#SPEEX_ENC_BITRATE=15000
#SPEEX_ENC_COMPLEXITY=2
#SPEEX_ENC_VBR=0
#SPEEX_ENC_VBR_QUALITY=4
#SPEEX_ENC_ABR=15000
#SPEEX_DEC_ENHANCER=1


[NetTx]
TYPE=Net
HOST=remote.tx.host
TCP_PORT=5210
AUTH_KEY="Change this key now!"
CODEC=S16
#SPEEX_ENC_FRAMES_PER_PACKET=4
#SPEEX_ENC_QUALITY=4.
#SPEEX_ENC_BITRATE=15000
#SPEEX_ENC_COMPLEXITY=2
#SPEEX_ENC_VBR=0
#SPEEX_ENC_VBR_QUALITY=4
#SPEEX_ENC_ABR=15000
#SPEEX_DEC_ENHANCER=1


[Rx_70cm]
TYPE=Local
#AUDIO_DEV=alsa:plughw:0
AUDIO_DEV=alsa:hw:0
AUDIO_CHANNEL=1
#SQL_DET=VOX
SQL_DET=SIGLEV
#SQL_DET=CTCSS
SQL_START_DELAY=0
SQL_DELAY=0
SQL_HANGTIME=2000
#SQL_TIMEOUT=600
VOX_FILTER_DEPTH=20
VOX_THRESH=1000
CTCSS_FQ=94.8
CTCSS_THRESH=15
SERIAL_PORT=/dev/ttyUSB0
SERIAL_PIN=CTS:SET
#EVDEV_DEVNAME=/dev/input/by-id/usb-SYNIC_SYNIC_Wireless_Audio-event-if03
#EVDEV_OPEN=1,163,1
#EVDEV_CLOSE=1,163,0
#SIGLEV_DET=TONE
SIGLEV_SLOPE=54.58
SIGLEV_OFFSET=-123.53
#TONE_SIGLEV_MAP=100,84,60,50,37,32,28,23,19,8
SIGLEV_OPEN_THRESH=30
SIGLEV_CLOSE_THRESH=10
DEEMPHASIS=0
#SQL_TAIL_ELIM=300
#PREAMP=6
PEAK_METER=1
DTMF_DEC_TYPE=INTERNAL
DTMF_MUTING=1
DTMF_HANGTIME=100
DTMF_SERIAL=/dev/ttyUSB0
#DTMF_MAX_FWD_TWIST=8
#DTMF_MAX_REV_TWIST=4
#1750_MUTING=1
#SEL5_DEC_TYPE=INTERNAL
#SEL5_TYPE=ZVEI1


[Tx_70cm]
TYPE=Local
AUDIO_DEV=alsa:hw:0
#AUDIO_DEV=alsa:plughw:0
AUDIO_CHANNEL=1
PTT_PORT=/dev/ttyUSB0
PTT_PIN=DTRRTS
PTT_HANGTIME=1000
TIMEOUT=300
TX_DELAY=500
#CTCSS_FQ=94.8
#CTCSS_LEVEL=9
PREEMPHASIS=0
DTMF_TONE_LENGTH=100
DTMF_TONE_SPACING=50
DTMF_TONE_AMP=-18


[LocationInfo]
APRS_SERVER_LIST=euro.aprs2.net:14580
STATUS_SERVER_LIST=aprs.echolink.org:5199
LON_POSITION=6.55.10E
LAT_POSITION=51.03.36N
CALLSIGN=EL-DO1PBL
FREQUENCY=432.825
TX_POWER=2
ANTENNA_GAIN=6
ANTENNA_HEIGHT=20m
ANTENNA_DIR=-1
PATH=WIDE1-1
BEACON_INTERVAL=30
TONE=0
COMMENT=DO1PBL Echolink Testserver running SvxLink by SM0SVX

### BEGIN INIT INFO
# Provides:      svxlink
# Required-Start:
# Required-Stop:
# Should-Start:
# Should-Stop:
# Default-Start:   2 3 4 5
# Default-Stop:      0 1 6
# Short-Description:   Starts svxlink daemon
# Description:
### END INIT INFO


PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/bin/svxlink
NAME=svxlink
DESC="svxlink daemon"
OPTIONS=" --daemon --logfile=/var/log/${NAME}.log --pidfile=/var/run/${NAME}.pid"


test -x $DAEMON || exit 0


set -e




case "$1" in
   start)
      echo -n "Starting $DESC: "


      if [ "`pidof ${DAEMON}`" = "" ]
      then
         start-stop-daemon --start --quiet --exec $DAEMON -- $OPTIONS
         echo "$NAME."
      else
         echo ""
         echo "A copy of the daemon is still running.  If you just stopped it,"
         echo "please wait about 5 seconds for it to shut down."
         exit 0
      fi
      ;;


   stop)
      echo -n "Stopping $DESC: "
      start-stop-daemon --stop --oknodo --pidfile /var/run/$NAME.pid || echo "Not Running."
      rm -f /var/run/$NAME.pid
      echo "$NAME."
      ;;


   restart|force-reload)
      $0 stop
      sleep 10
      $0 start
      ;;


   *)
      N=/etc/init.d/$NAME
      echo "Usage: $N {start|stop|restart|force-reload}" >&2
      exit 1
      ;;
esac


exit 0