Radiobox und Svxlink

DL1UDO · June 2, 2022 at 5:08 PM

Hallo zusammen,

ich habe hier eine Radiobox mit svxlink laufen, sie soll das C4FM Relais mit echolink bedienen,

eigentlich alles ganz einfach. Leider ist in der Config svxlink.conf auch sehr viel auskommentiert, sodas das Relais

nichts Hört, ich höre es aber sub Audio ist auch eingeschaltet hat jemand was ähnliches laufen und könnte mir mal seine Config zur Verfügung stellen ?

Echolink Verbindung zum Server klappt.

Für Vorschläge wäre ich dankbar

VY 73 de DL1UDO

DL1UDO · June 4, 2022 at 6:32 AM

Ich teile hier mal meine Konfig:

Verbindung zum Echolink geht,

auch sendet er auf der Eingabe vom Relais aus,

SubAudio ist auf 67 Hz eingestellt.

###############################################################################

# #

# Configuration file for the SvxLink server #

# #

###############################################################################

[GLOBAL]

#MODULE_PATH=/usr/lib/svxlink

LOGICS=SimplexLogic

CFG_DIR=svxlink.d

TIMESTAMP_FORMAT="%c"

CARD_SAMPLE_RATE=16000

LOCATION_INFO=LocationInfo

#LINKS=NetLink

[SimplexLogic]

TYPE=Simplex

RX=Rx1

TX=Tx1

MODULES=ModuleHelp,ModuleParrot,ModuleEchoLink

CALLSIGN=DB0XX

SHORT_IDENT_INTERVAL=30

LONG_IDENT_INTERVAL=60

#IDENT_ONLY_AFTER_TX=4

#EXEC_CMD_ON_SQL_CLOSE=500

EVENT_HANDLER=/usr/share/svxlink/events.tcl

DEFAULT_LANG=en_US

#RGR_SOUND_DELAY=250

#REPORT_CTCSS=136.5

TX_CTCSS=ALWAYS

MACROS=Macros

FX_GAIN_NORMAL=0

FX_GAIN_LOW=-12

#ACTIVATE_MODULE_ON_LONG_CMD=4:EchoLink

#QSO_RECORDER=8:QsoRecorder

#ONLINE_CMD=998877

#MUTE_RX_ON_TX=1

#MUTE_TX_ON_RX=1

[RepeaterLogic]

TYPE=Repeater

RX=Rx1

TX=Tx1

MODULES=ModuleHelp,ModuleParrot,ModuleEchoLink

CALLSIGN=DB0XXX

SHORT_IDENT_INTERVAL=30

LONG_IDENT_INTERVAL=60

#IDENT_ONLY_AFTER_TX=4

#EXEC_CMD_ON_SQL_CLOSE=500

EVENT_HANDLER=/usr/share/svxlink/events.tcl

DEFAULT_LANG=en_US

RGR_SOUND_DELAY=250

#REPORT_CTCSS=136.5

#TX_CTCSS=SQL_OPEN

MACROS=Macros

#SEL5_MACRO_RANGE=03400,03499

FX_GAIN_NORMAL=0

FX_GAIN_LOW=-12

#QSO_RECORDER=8:QsoRecorder

#NO_REPEAT=1

IDLE_TIMEOUT=20

#OPEN_ON_1750=50

#OPEN_ON_CTCSS=136:2000

#OPEN_ON_DTMF=*

OPEN_ON_SQL=50

#OPEN_ON_SEL5=01234

OPEN_SQL_FLANK=OPEN

OPEN_ON_SQL_AFTER_RPT_CLOSE=60

#IDLE_SOUND_INTERVAL=3000

#SQL_FLAP_SUP_MIN_TIME=1000

#SQL_FLAP_SUP_MAX_COUNT=10

#ACTIVATE_MODULE_ON_LONG_CMD=4:EchoLink

#IDENT_NAG_TIMEOUT=15

#IDENT_NAG_MIN_TIME=2000

#ONLINE_CMD=998877

#STATE_PTY=/dev/shm/state_pty

[LinkToR4]

CONNECT_LOGICS=RepeaterLogic:94:SK3AB,SimplexLogic:92:SK3CD

#DEFAULT_ACTIVE=1

TIMEOUT=300

#AUTOACTIVATE_ON_SQL=RepeaterLogic

[Macros]

1=EchoLink:9999#

9=Parrot:0123456789#

03400=EchoLink:9999#

[QsoRecorder]

REC_DIR=/var/spool/svxlink/qso_recorder

#MIN_TIME=1000

MAX_TIME=3600

SOFT_TIME=300

MAX_DIRSIZE=1024

#DEFAULT_ACTIVE=1

#TIMEOUT=300

#QSO_TIMEOUT=300

#ENCODER_CMD=/usr/bin/oggenc -Q \"%f\" && rm \"%f\"

[Voter]

TYPE=Voter

RECEIVERS=Rx1,Rx2,Rx3

VOTING_DELAY=200

BUFFER_LENGTH=0

#REVOTE_INTERVAL=1000

#HYSTERESIS=50

#SQL_CLOSE_REVOTE_DELAY=500

#RX_SWITCH_DELAY=500

#SQL_STATE_PTY=/var/run/svxlink/sql_state

[MultiTx]

TYPE=Multi

TRANSMITTERS=Tx1,Pa1

[ReflectorLogic]

TYPE=Reflector

HOST=servercall.ampr.org

PORT=5300

AUTH_KEY="TOPSECRET"

CALLSIGN="NOCALL"

AUDIO_CODEC=OPUS

[NetLink]

NAME=NetLink

DEFAULT_ACTIVE=1

TIMEOUT=300

CONNECT_LOGICS=SimplexLogic:9:NOCALL,ReflectorLogic

[RemoteRx1]

TYPE=Net

HOST=servercall.ampr.org

TCP_PORT=5220

AUTH_KEY="TOPSECRET"

LOG_DISCONNECTS_ONCE=1

CODEC=OPUS

[RemoteTx1]

TYPE=Net

HOST=servercall.ampr.org

TCP_PORT=5220

AUTH_KEY="TOPSECRET"

LOG_DISCONNECTS_ONCE=1

CODEC=OPUS

[Rx1]

TYPE=Local

AUDIO_DEV=alsa:hw:0

AUDIO_CHANNEL=0

SQL_DET=GPIO

SQL_START_DELAY=0

SQL_DELAY=0

SQL_HANGTIME=0

#SQL_EXTENDED_HANGTIME=1000

#SQL_EXTENDED_HANGTIME_THRESH=15

#SQL_TIMEOUT=600

VOX_FILTER_DEPTH=20

VOX_THRESH=200

#CTCSS_MODE=2

#CTCSS_FQ=136.5

#CTCSS_SNR_OFFSET=0

#CTCSS_OPEN_THRESH=15

#CTCSS_CLOSE_THRESH=9

#CTCSS_BPF_LOW=60

#CTCSS_BPF_HIGH=270

SERIAL_PORT=/dev/ttyS0

SERIAL_PIN=CTS

#SERIAL_SET_PINS=DTR!RTS

#EVDEV_DEVNAME=/dev/input/by-id/usb-SYNIC_SYNIC_Wireless_Audio-event-if03

#EVDEV_OPEN=1,163,1

#EVDEV_CLOSE=1,163,0

GPIO_SQL_PIN=gpio10

#PTY_PATH=/tmp/rx1_sql

#HID_DEVICE=/dev/hidraw3

#HID_SQL_PIN=VOL_UP

#SIGLEV_DET=TONE

SIGLEV_SLOPE=1

SIGLEV_OFFSET=0

#SIGLEV_BOGUS_THRESH=120

#TONE_SIGLEV_MAP=100,84,60,50,37,32,28,23,19,8

SIGLEV_OPEN_THRESH=30

SIGLEV_CLOSE_THRESH=10

#DEEMPHASIS=1

AUDIO_FILTER=HpBe1/1000

SQL_TAIL_ELIM=150

PREAMP=8

PEAK_METER=0

DTMF_DEC_TYPE=INTERNAL

DTMF_MUTING=1

DTMF_HANGTIME=100

DTMF_SERIAL=/dev/ttyS0

#DTMF_PTY=/tmp/rx1_dtmf

#DTMF_MAX_FWD_TWIST=8

#DTMF_MAX_REV_TWIST=4

1750_MUTING=1

#SEL5_DEC_TYPE=INTERNAL

#SEL5_TYPE=ZVEI1

#FQ=433475000

#WBRX=WbRx1

[WbRx1]

#HOST=localhost

#PORT=1234

#CENTER_FQ=435075000

#FQ_CORR=0

#GAIN=0

#PEAK_METER=1

#SAMPLE_RATE=960000

[Rx2]

TYPE=Ddr

SQL_DET=SIGLEV

SIGLEV_DET=DDR

SIGLEV_SLOPE=2.0

SIGLEV_OFFSET=100.0

SIGLEV_OPEN_THRESH=20

SIGLEV_CLOSE_THRESH=10

#DEEMPHASIS=1

FQ=432900000

MODULATION=NBFM

SQL_TAIL_ELIM=300

#PREAMP=0.0

DTMF_DEC_TYPE=INTERNAL

DTMF_MUTING=1

DTMF_HANGTIME=100

1750_MUTING=1

WBRX=WbRx2

[WbRx2]

TYPE=RtlUsb

DEV_MATCH=0

FQ_CORR=0.0

GAIN=49.6

SAMPLE_RATE=960000

[Tx1]

TYPE=Local

AUDIO_DEV=alsa:default

AUDIO_CHANNEL=0

PTT_TYPE=GPIO

PTT_PORT=/dev/ttyS0

PTT_PIN=gpio17

#HID_DEVICE=/dev/hidraw3

#HID_PTT_PIN=GPIO3

#SERIAL_SET_PINS=DTR!RTS

#PTT_HANGTIME=1000

#TIMEOUT=300

#TX_DELAY=500

#CTCSS_FQ=136.5

#CTCSS_LEVEL=9

AUDIO_FILTER=LpBe1/1000

#PREEMPHASIS=1

DTMF_TONE_LENGTH=100

DTMF_TONE_SPACING=50

DTMF_DIGIT_PWR=-18

#MASTER_GAIN=3.0

[Tx2]

TYPE=Local

AUDIO_DEV=alsa:plughw:0

AUDIO_CHANNEL=0

PTT_TYPE=GPIO

PTT_PIN=gpio17

#AUDIO_FILTER=LpBe1/1000

#MASTER_GAIN=3.0

[Pa1]

TYPE=Local

AUDIO_DEV=alsa:null

AUDIO_CHANNEL=0

PTT_TYPE=SerialPin

PTT_PORT=/dev/ttyUSB0

PTT_PIN=RTS

[LocationInfo]

#APRS_SERVER_LIST=euro.aprs2.net:14580

STATUS_SERVER_LIST=aprs.echolink.org:5199

LON_POSITION=00.00.54E

LAT_POSITION=00.00.21N

CALLSIGN=EL-DB0XXX-L

FREQUENCY=4XX.XXX

TX_POWER=1

ANTENNA_GAIN=6

ANTENNA_HEIGHT=15m

ANTENNA_DIR=-1

PATH=WIDE1-1

BEACON_INTERVAL=10

#TONE=67

TELEMETRY=0

FREQ_INFO=1

NARROW=1

#SHIFT=-760

COMMENT=[HAMServerPi]

Module Echolink:

[ModuleEchoLink]

NAME=EchoLink

ID=2

TIMEOUT=60

#ALLOW_IP=192.168.1.0/24

#DROP_INCOMING=^()$

#REJECT_INCOMING=^()$

#ACCEPT_INCOMING=^(.*)$

#REJECT_OUTGOING=^()$

#ACCEPT_OUTGOING=^(.*)$

#REJECT_CONF=0

#CHECK_NR_CONNECTS=2,300,120

SERVERS=europe.echolink.org

CALLSIGN=DB0XXX-L

PASSWORD=XXXXXXX

SYSOPNAME=XXXXXX

LOCATION=[HAMServerPi]

#PROXY_SERVER=

#PROXY_PORT=

#PROXY_PASSWORD=

#BIND_ADDR=10.20.30.40

MAX_QSOS=10

MAX_CONNECTIONS=11

LINK_IDLE_TIMEOUT=300

#AUTOCON_ECHOLINK_ID=9999

#AUTOCON_TIME=1200

#USE_GSM_ONLY=1

#DEFAULT_LANG=en_US

DESCRIPTION="[HAMServerPi]

VY 73

dh9yap · June 18, 2022 at 10:45 AM

Hallo DL1UDO

Welche Version von Svxlink benutzt du ?

Wie ist Svxlink mit C4FM Verbunden ?

73 55 Jürgen

Tags